Saramo 2D 15

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1500
Weight, kg	1260
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A
Area to be heated, m2	60-80
Energy intensity, kWh	44.8
Nominal power (min-max), kW	1,8
Efficiency, %	82
CO, mg/Nm³	1125
Particles, mg/Nm3	40
OGC, mg/Nm³	48
NO_x, mg/Nm³	157
Maximum amount of wood, kg	13.5
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	11.2
Heat release time (h) 100%	7.6
Heat release time (h) 50%	23.7
Heat release time (h) 25%	39.4
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1000
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	189
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	227
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 18

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1800
Weight, kg	2050
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	65-90
Energy intensity, kWh	59.4
Nominal power (min-max), kW	2,0
Efficiency, %	82
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	157
Maximum amount of wood, kg	17.3
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	14.3
Heat release time (h) 100%	7.8
Heat release time (h) 50%	24.4
Heat release time (h) 25%	40.2
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	175
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	210
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 21

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	2100
Weight, kg	2420
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	70-100
Energy intensity, kWh	74.9
Nominal power (min-max), kW	2,1
Efficiency, %	87
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	118
Maximum amount of wood, kg	21
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	17.4
Heat release time (h) 100%	8
Heat release time (h) 50%	25
Heat release time (h) 25%	41
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (150)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	161
Max. flue gas temperature °C	254
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	193
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 21

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	2100
Weight, kg	1610
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	70-100
Energy intensity, kWh	74.9
Nominal power (min-max), kW	2,1
Efficiency, %	87
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	118
Maximum amount of wood, kg	21
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	17.4
Heat release time (h) 100%	8
Heat release time (h) 50%	25
Heat release time (h) 25%	41
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (150)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	161
Max. flue gas temperature °C	254
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	193
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 15

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1500
Weight, kg	1260
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A
Area to be heated, m2	60-80
Energy intensity, kWh	44.8
Nominal power (min-max), kW	1,8
Efficiency, %	82
CO, mg/Nm³	1125
Particles, mg/Nm3	40
OGC, mg/Nm³	48
NO_x, mg/Nm³	157
Maximum amount of wood, kg	13.5
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	11.2
Heat release time (h) 100%	7.6
Heat release time (h) 50%	23.7
Heat release time (h) 25%	39.4
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1000
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	189
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	227
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 18

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1800
Weight, kg	1540
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	65-90
Energy intensity, kWh	59.4
Nominal power (min-max), kW	2,0
Efficiency, %	82
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	157
Maximum amount of wood, kg	17.3
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	14.3
Heat release time (h) 100%	7.8
Heat release time (h) 50%	24.4
Heat release time (h) 25%	40.2
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	175
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	210
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 21

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	2100
Weight, kg	2420
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	70-100
Energy intensity, kWh	74.9
Nominal power (min-max), kW	2,1
Efficiency, %	87
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	118
Maximum amount of wood, kg	21
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	17.4
Heat release time (h) 100%	8
Heat release time (h) 50%	25
Heat release time (h) 25%	41
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (150)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	161
Max. flue gas temperature °C	254
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	193
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 15

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1500
Weight, kg	1260
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A
Area to be heated, m2	60-80
Energy intensity, kWh	44.8
Nominal power (min-max), kW	1,8
Efficiency, %	82
CO, mg/Nm³	1125
Particles, mg/Nm3	40
OGC, mg/Nm³	48
NO_x, mg/Nm³	157
Maximum amount of wood, kg	13.5
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	11.2
Heat release time (h) 100%	7.6
Heat release time (h) 50%	23.7
Heat release time (h) 25%	39.4
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1000
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	189
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	227
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 18

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1800
Weight, kg	1540
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	65-90
Energy intensity, kWh	59.4
Nominal power (min-max), kW	2,0
Efficiency, %	82
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	157
Maximum amount of wood, kg	17.3
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	14.3
Heat release time (h) 100%	7.8
Heat release time (h) 50%	24.4
Heat release time (h) 25%	40.2
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	175
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	210
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 21

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	2100
Weight, kg	2420
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	70-100
Energy intensity, kWh	74.9
Nominal power (min-max), kW	2,1
Efficiency, %	87
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	118
Maximum amount of wood, kg	21
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	17.4
Heat release time (h) 100%	8
Heat release time (h) 50%	25
Heat release time (h) 25%	41
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (150)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	161
Max. flue gas temperature °C	254
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	193
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 15

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1500
Weight, kg	1270
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A
Area to be heated, m2	60-80
Energy intensity, kWh	44.8
Nominal power (min-max), kW	1,8
Efficiency, %	82
CO, mg/Nm³	1125
Particles, mg/Nm3	40
OGC, mg/Nm³	48
NO_x, mg/Nm³	157
Maximum amount of wood, kg	13.5
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	11.2
Heat release time (h) 100%	7.6
Heat release time (h) 50%	23.7
Heat release time (h) 25%	39.4
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1000
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	189
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	227
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 18

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1800
Weight, kg	1540
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	65-90
Energy intensity, kWh	59.4
Nominal power (min-max), kW	2,0
Efficiency, %	82
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	157
Maximum amount of wood, kg	17.3
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	14.3
Heat release time (h) 100%	7.8
Heat release time (h) 50%	24.4
Heat release time (h) 25%	40.2
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	175
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	210
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 21

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	2100
Weight, kg	1810
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	70-100
Energy intensity, kWh	74.9
Nominal power (min-max), kW	2,1
Efficiency, %	87
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	118
Maximum amount of wood, kg	21
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	17.4
Heat release time (h) 100%	8
Heat release time (h) 50%	25
Heat release time (h) 25%	41
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (150)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	161
Max. flue gas temperature °C	254
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	193
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 15

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1500
Weight, kg	1600
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A
Area to be heated, m2	60-80
Energy intensity, kWh	44.8
Nominal power (min-max), kW	1,8
Efficiency, %	82
CO, mg/Nm³	1125
Particles, mg/Nm3	40
OGC, mg/Nm³	48
NO_x, mg/Nm³	157
Maximum amount of wood, kg	13.5
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	11.2
Heat release time (h) 100%	7.6
Heat release time (h) 50%	23.7
Heat release time (h) 25%	39.4
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1000
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	189
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	227
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 18

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1800
Weight, kg	1540
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	65-90
Energy intensity, kWh	59.4
Nominal power (min-max), kW	2,0
Efficiency, %	82
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	157
Maximum amount of wood, kg	17.3
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	14.3
Heat release time (h) 100%	7.8
Heat release time (h) 50%	24.4
Heat release time (h) 25%	40.2
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	175
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	210
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 21

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	2100
Weight, kg	1811
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	70-100
Energy intensity, kWh	74.9
Nominal power (min-max), kW	2,1
Efficiency, %	87
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	118
Maximum amount of wood, kg	21
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	17.4
Heat release time (h) 100%	8
Heat release time (h) 50%	25
Heat release time (h) 25%	41
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (150)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	161
Max. flue gas temperature °C	254
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	193
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 15

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1500
Weight, kg	1600
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A
Area to be heated, m2	60-80
Energy intensity, kWh	44.8
Nominal power (min-max), kW	1,8
Efficiency, %	82
CO, mg/Nm³	1125
Particles, mg/Nm3	40
OGC, mg/Nm³	48
NO_x, mg/Nm³	157
Maximum amount of wood, kg	13.5
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	11.2
Heat release time (h) 100%	7.6
Heat release time (h) 50%	23.7
Heat release time (h) 25%	39.4
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1000
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	189
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	227
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 18

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1800
Weight, kg	1540
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	65-90
Energy intensity, kWh	59.4
Nominal power (min-max), kW	2,0
Efficiency, %	82
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	157
Maximum amount of wood, kg	17.3
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	14.3
Heat release time (h) 100%	7.8
Heat release time (h) 50%	24.4
Heat release time (h) 25%	40.2
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	175
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	210
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 21

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	2100
Weight, kg	1812
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	70-100
Energy intensity, kWh	74.9
Nominal power (min-max), kW	2,1
Efficiency, %	87
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	118
Maximum amount of wood, kg	21
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	17.4
Heat release time (h) 100%	8
Heat release time (h) 50%	25
Heat release time (h) 25%	41
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (150)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	161
Max. flue gas temperature °C	254
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	193
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 15

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1500
Weight, kg	1600
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A
Area to be heated, m2	60-80
Energy intensity, kWh	44.8
Nominal power (min-max), kW	1,8
Efficiency, %	82
CO, mg/Nm³	1125
Particles, mg/Nm3	40
OGC, mg/Nm³	48
NO_x, mg/Nm³	157
Maximum amount of wood, kg	13.5
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	11.2
Heat release time (h) 100%	7.6
Heat release time (h) 50%	23.7
Heat release time (h) 25%	39.4
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1000
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	189
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	227
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 18

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1800
Weight, kg	1910
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	65-90
Energy intensity, kWh	59.4
Nominal power (min-max), kW	2,0
Efficiency, %	82
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	157
Maximum amount of wood, kg	17.3
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	14.3
Heat release time (h) 100%	7.8
Heat release time (h) 50%	24.4
Heat release time (h) 25%	40.2
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	175
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	210
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 21

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	2100
Weight, kg	1813
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	70-100
Energy intensity, kWh	74.9
Nominal power (min-max), kW	2,1
Efficiency, %	87
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	118
Maximum amount of wood, kg	21
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	17.4
Heat release time (h) 100%	8
Heat release time (h) 50%	25
Heat release time (h) 25%	41
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (150)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	161
Max. flue gas temperature °C	254
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	193
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 15

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1500
Weight, kg	1600
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A
Area to be heated, m2	60-80
Energy intensity, kWh	44.8
Nominal power (min-max), kW	1,8
Efficiency, %	82
CO, mg/Nm³	1125
Particles, mg/Nm3	40
OGC, mg/Nm³	48
NO_x, mg/Nm³	157
Maximum amount of wood, kg	13.5
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	11.2
Heat release time (h) 100%	7.6
Heat release time (h) 50%	23.7
Heat release time (h) 25%	39.4
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1000
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	189
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	227
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 18

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1800
Weight, kg	1910
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	65-90
Energy intensity, kWh	59.4
Nominal power (min-max), kW	2,0
Efficiency, %	82
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	157
Maximum amount of wood, kg	17.3
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	14.3
Heat release time (h) 100%	7.8
Heat release time (h) 50%	24.4
Heat release time (h) 25%	40.2
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	175
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	210
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 21

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	2100
Weight, kg	1814
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	70-100
Energy intensity, kWh	74.9
Nominal power (min-max), kW	2,1
Efficiency, %	87
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	118
Maximum amount of wood, kg	21
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	17.4
Heat release time (h) 100%	8
Heat release time (h) 50%	25
Heat release time (h) 25%	41
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (150)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	161
Max. flue gas temperature °C	254
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	193
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 15

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1500
Weight, kg	1180
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A
Area to be heated, m2	60-80
Energy intensity, kWh	44.8
Nominal power (min-max), kW	1,8
Efficiency, %	82
CO, mg/Nm³	1125
Particles, mg/Nm3	40
OGC, mg/Nm³	48
NO_x, mg/Nm³	157
Maximum amount of wood, kg	13.5
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	11.2
Heat release time (h) 100%	7.6
Heat release time (h) 50%	23.7
Heat release time (h) 25%	39.4
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1000
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	189
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	227
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 18

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1800
Weight, kg	1910
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	65-90
Energy intensity, kWh	59.4
Nominal power (min-max), kW	2,0
Efficiency, %	82
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	157
Maximum amount of wood, kg	17.3
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	14.3
Heat release time (h) 100%	7.8
Heat release time (h) 50%	24.4
Heat release time (h) 25%	40.2
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	175
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	210
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 21

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	2100
Weight, kg	2230
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	70-100
Energy intensity, kWh	74.9
Nominal power (min-max), kW	2,1
Efficiency, %	87
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	118
Maximum amount of wood, kg	21
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	17.4
Heat release time (h) 100%	8
Heat release time (h) 50%	25
Heat release time (h) 25%	41
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (150)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	161
Max. flue gas temperature °C	254
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	193
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 15

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1500
Weight, kg	1180
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A
Area to be heated, m2	60-80
Energy intensity, kWh	44.8
Nominal power (min-max), kW	1,8
Efficiency, %	82
CO, mg/Nm³	1125
Particles, mg/Nm3	40
OGC, mg/Nm³	48
NO_x, mg/Nm³	157
Maximum amount of wood, kg	13.5
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	11.2
Heat release time (h) 100%	7.6
Heat release time (h) 50%	23.7
Heat release time (h) 25%	39.4
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1000
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	189
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	227
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 18

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1800
Weight, kg	1910
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	65-90
Energy intensity, kWh	59.4
Nominal power (min-max), kW	2,0
Efficiency, %	82
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	157
Maximum amount of wood, kg	17.3
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	14.3
Heat release time (h) 100%	7.8
Heat release time (h) 50%	24.4
Heat release time (h) 25%	40.2
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	175
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	210
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 21

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	2100
Weight, kg	2230
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	70-100
Energy intensity, kWh	74.9
Nominal power (min-max), kW	2,1
Efficiency, %	87
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	118
Maximum amount of wood, kg	21
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	17.4
Heat release time (h) 100%	8
Heat release time (h) 50%	25
Heat release time (h) 25%	41
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (150)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	161
Max. flue gas temperature °C	254
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	193
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 15

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1500
Weight, kg	1180
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A
Area to be heated, m2	60-80
Energy intensity, kWh	44.8
Nominal power (min-max), kW	1,8
Efficiency, %	82
CO, mg/Nm³	1125
Particles, mg/Nm3	40
OGC, mg/Nm³	48
NO_x, mg/Nm³	157
Maximum amount of wood, kg	13.5
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	11.2
Heat release time (h) 100%	7.6
Heat release time (h) 50%	23.7
Heat release time (h) 25%	39.4
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1000
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	189
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	227
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 18

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1800
Weight, kg	1390
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	65-90
Energy intensity, kWh	59.4
Nominal power (min-max), kW	2,0
Efficiency, %	82
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	157
Maximum amount of wood, kg	17.3
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	14.3
Heat release time (h) 100%	7.8
Heat release time (h) 50%	24.4
Heat release time (h) 25%	40.2
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	175
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	210
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 21

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	2100
Weight, kg	2230
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	70-100
Energy intensity, kWh	74.9
Nominal power (min-max), kW	2,1
Efficiency, %	87
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	118
Maximum amount of wood, kg	21
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	17.4
Heat release time (h) 100%	8
Heat release time (h) 50%	25
Heat release time (h) 25%	41
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (150)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	161
Max. flue gas temperature °C	254
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	193
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 15

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1500
Weight, kg	1690
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A
Area to be heated, m2	60-80
Energy intensity, kWh	44.8
Nominal power (min-max), kW	1,8
Efficiency, %	82
CO, mg/Nm³	1125
Particles, mg/Nm3	40
OGC, mg/Nm³	48
NO_x, mg/Nm³	157
Maximum amount of wood, kg	13.5
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	11.2
Heat release time (h) 100%	7.6
Heat release time (h) 50%	23.7
Heat release time (h) 25%	39.4
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1000
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	189
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	227
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 15

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1500
Weight, kg	1180
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A
Area to be heated, m2	60-80
Energy intensity, kWh	44.8
Nominal power (min-max), kW	1,8
Efficiency, %	82
CO, mg/Nm³	1125
Particles, mg/Nm3	40
OGC, mg/Nm³	48
NO_x, mg/Nm³	157
Maximum amount of wood, kg	13.5
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	11.2
Heat release time (h) 100%	7.6
Heat release time (h) 50%	23.7
Heat release time (h) 25%	39.4
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1000
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	189
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	227
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 18

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1800
Weight, kg	1390
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	65-90
Energy intensity, kWh	59.4
Nominal power (min-max), kW	2,0
Efficiency, %	82
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	157
Maximum amount of wood, kg	17.3
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	14.3
Heat release time (h) 100%	7.8
Heat release time (h) 50%	24.4
Heat release time (h) 25%	40.2
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	175
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	210
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 21

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	2100
Weight, kg	2230
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	70-100
Energy intensity, kWh	74.9
Nominal power (min-max), kW	2,1
Efficiency, %	87
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	118
Maximum amount of wood, kg	21
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	17.4
Heat release time (h) 100%	8
Heat release time (h) 50%	25
Heat release time (h) 25%	41
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (150)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	161
Max. flue gas temperature °C	254
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	193
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 15

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1500
Weight, kg	1690
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A
Area to be heated, m2	60-80
Energy intensity, kWh	44.8
Nominal power (min-max), kW	1,8
Efficiency, %	82
CO, mg/Nm³	1125
Particles, mg/Nm3	40
OGC, mg/Nm³	48
NO_x, mg/Nm³	157
Maximum amount of wood, kg	13.5
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	11.2
Heat release time (h) 100%	7.6
Heat release time (h) 50%	23.7
Heat release time (h) 25%	39.4
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1000
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	189
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	227
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 15

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1500
Weight, kg	1180
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A
Area to be heated, m2	60-80
Energy intensity, kWh	44.8
Nominal power (min-max), kW	1,8
Efficiency, %	82
CO, mg/Nm³	1125
Particles, mg/Nm3	40
OGC, mg/Nm³	48
NO_x, mg/Nm³	157
Maximum amount of wood, kg	13.5
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	11.2
Heat release time (h) 100%	7.6
Heat release time (h) 50%	23.7
Heat release time (h) 25%	39.4
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1000
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	189
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	227
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 18

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1800
Weight, kg	1390
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	65-90
Energy intensity, kWh	59.4
Nominal power (min-max), kW	2,0
Efficiency, %	82
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	157
Maximum amount of wood, kg	17.3
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	14.3
Heat release time (h) 100%	7.8
Heat release time (h) 50%	24.4
Heat release time (h) 25%	40.2
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	175
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	210
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 21

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	2100
Weight, kg	1610
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	70-100
Energy intensity, kWh	74.9
Nominal power (min-max), kW	2,1
Efficiency, %	87
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	118
Maximum amount of wood, kg	21
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	17.4
Heat release time (h) 100%	8
Heat release time (h) 50%	25
Heat release time (h) 25%	41
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (150)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	161
Max. flue gas temperature °C	254
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	193
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 15

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1500
Weight, kg	1690
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A
Area to be heated, m2	60-80
Energy intensity, kWh	44.8
Nominal power (min-max), kW	1,8
Efficiency, %	82
CO, mg/Nm³	1125
Particles, mg/Nm3	40
OGC, mg/Nm³	48
NO_x, mg/Nm³	157
Maximum amount of wood, kg	13.5
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	11.2
Heat release time (h) 100%	7.6
Heat release time (h) 50%	23.7
Heat release time (h) 25%	39.4
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1000
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	189
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	227
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 18

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1800
Weight, kg	2050
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	65-90
Energy intensity, kWh	59.4
Nominal power (min-max), kW	2,0
Efficiency, %	82
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	157
Maximum amount of wood, kg	17.3
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	14.3
Heat release time (h) 100%	7.8
Heat release time (h) 50%	24.4
Heat release time (h) 25%	40.2
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	175
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	210
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 18

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1800
Weight, kg	1390
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	65-90
Energy intensity, kWh	59.4
Nominal power (min-max), kW	2,0
Efficiency, %	82
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	157
Maximum amount of wood, kg	17.3
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	14.3
Heat release time (h) 100%	7.8
Heat release time (h) 50%	24.4
Heat release time (h) 25%	40.2
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	175
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	210
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 21

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	2100
Weight, kg	1610
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	70-100
Energy intensity, kWh	74.9
Nominal power (min-max), kW	2,1
Efficiency, %	87
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	118
Maximum amount of wood, kg	21
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	17.4
Heat release time (h) 100%	8
Heat release time (h) 50%	25
Heat release time (h) 25%	41
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (150)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	161
Max. flue gas temperature °C	254
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	193
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 15

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1500
Weight, kg	1690
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A
Area to be heated, m2	60-80
Energy intensity, kWh	44.8
Nominal power (min-max), kW	1,8
Efficiency, %	82
CO, mg/Nm³	1125
Particles, mg/Nm3	40
OGC, mg/Nm³	48
NO_x, mg/Nm³	157
Maximum amount of wood, kg	13.5
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	11.2
Heat release time (h) 100%	7.6
Heat release time (h) 50%	23.7
Heat release time (h) 25%	39.4
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1000
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	189
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	227
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 18

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1800
Weight, kg	2050
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	65-90
Energy intensity, kWh	59.4
Nominal power (min-max), kW	2,0
Efficiency, %	82
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	157
Maximum amount of wood, kg	17.3
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	14.3
Heat release time (h) 100%	7.8
Heat release time (h) 50%	24.4
Heat release time (h) 25%	40.2
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	175
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	210
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 18

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1800
Weight, kg	1390
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	65-90
Energy intensity, kWh	59.4
Nominal power (min-max), kW	2,0
Efficiency, %	82
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	157
Maximum amount of wood, kg	17.3
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	14.3
Heat release time (h) 100%	7.8
Heat release time (h) 50%	24.4
Heat release time (h) 25%	40.2
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	175
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	210
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 21

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	2100
Weight, kg	1610
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	70-100
Energy intensity, kWh	74.9
Nominal power (min-max), kW	2,1
Efficiency, %	87
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	118
Maximum amount of wood, kg	21
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	17.4
Heat release time (h) 100%	8
Heat release time (h) 50%	25
Heat release time (h) 25%	41
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (150)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	161
Max. flue gas temperature °C	254
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	193
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Saramo 2D 15

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1500
Weight, kg	1260
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A
Area to be heated, m2	60-80
Energy intensity, kWh	44.8
Nominal power (min-max), kW	1,8
Efficiency, %	82
CO, mg/Nm³	1125
Particles, mg/Nm3	40
OGC, mg/Nm³	48
NO_x, mg/Nm³	157
Maximum amount of wood, kg	13.5
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	11.2
Heat release time (h) 100%	7.6
Heat release time (h) 50%	23.7
Heat release time (h) 25%	39.4
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1000
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	189
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	227
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 18

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	1800
Weight, kg	2050
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	65-90
Energy intensity, kWh	59.4
Nominal power (min-max), kW	2,0
Efficiency, %	82
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	157
Maximum amount of wood, kg	17.3
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	14.3
Heat release time (h) 100%	7.8
Heat release time (h) 50%	24.4
Heat release time (h) 25%	40.2
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (200)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	175
Max. flue gas temperature °C	275
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	210
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 21

Connection below

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	2100
Weight, kg	2420
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	70-100
Energy intensity, kWh	74.9
Nominal power (min-max), kW	2,1
Efficiency, %	87
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	118
Maximum amount of wood, kg	21
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	17.4
Heat release time (h) 100%	8
Heat release time (h) 50%	25
Heat release time (h) 25%	41
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (150)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	161
Max. flue gas temperature °C	254
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	193
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Senso fireplace controller	Optional
Electrical resistors	Optional
Cooking products	Optional
Other considerations
A = Width of the chimney opening (mm), B = maximum dimension for the upper edge of the chimney opening from the floor (mm), C = minimum dimension for the lower edge of the chimney opening from the floor (mm)

Saramo 2D 21

Top connection

Downloadable documents

Manual DXF Footprint Performance level declaration, Dop Eco-design product information Energy sign Declaration of conformity

Dimensions
Width, mm	1250
Depth, mm	550
Height, mm	2100
Weight, kg	1610
Firebox width, mm	620
Firebox depth, mm	490
Heat technology
Energy sign	A+
Area to be heated, m2	70-100
Energy intensity, kWh	74.9
Nominal power (min-max), kW	2,1
Efficiency, %	87
CO, mg/Nm³	1250
Particles, mg/Nm3	40
OGC, mg/Nm³	67
NO_x, mg/Nm³	118
Maximum amount of wood, kg	21
Length of firewood, mm	330 (200-500)
Maximum amount of pellets, kg	17.4
Heat release time (h) 100%	8
Heat release time (h) 50%	25
Heat release time (h) 25%	41
Firewood length can vary between those shown in parentheses (XX mm)
Safety distances
Safety distances side, mm	50 (150)
Safety distances up, mm	100 (150)
Safety distances front, mm	1100
Safety distance for uninsulated product shown in parentheses (XX mm)
Chimney connection and combustion air information
Chimney recommendation, ø mm	150…210
Top connection, mm	150
Maximum weight of top connection flue, kg	550
Fire air intake from under the floor, connection size, ø mm	150
Average flue gas temperature °C	161
Max. flue gas temperature °C	254
Minimum draft of the flue, Pa.	12
Flue gas outlet temperature °C	193
Flue gas mass flow, g/s	32,1
Supplies
P10-Pellet system	Standard equipment
Ignition damper	Standard equipment
Senso fireplace controller	Optional
Cooking products	Optional
Other considerations
E = maximum dimension for the upper edge of the chimney opening from the floor from the top back at the connection (mm)

Search from site

Technical information

Saramo 2D 15

Dimensions

Heat technology

Safety distances

Chimney connection and combustion air information

Supplies

Other considerations

Saramo 2D 18

Dimensions

Heat technology

Safety distances

Chimney connection and combustion air information

Supplies

Other considerations

Saramo 2D 21

Dimensions

Heat technology

Safety distances

Chimney connection and combustion air information

Supplies

Other considerations

Saramo 2D 21

Dimensions

Heat technology

Safety distances

Chimney connection and combustion air information

Supplies

Other considerations

Saramo 2D 15

Dimensions

Heat technology

Safety distances

Chimney connection and combustion air information

Supplies

Other considerations

Saramo 2D 18

Dimensions

Heat technology

Safety distances

Chimney connection and combustion air information

Supplies

Other considerations

Saramo 2D 21

Dimensions

Heat technology

Safety distances

Chimney connection and combustion air information

Supplies

Other considerations

Saramo 2D 15

Dimensions

Heat technology

Safety distances

Chimney connection and combustion air information

Supplies

Other considerations

Saramo 2D 18

Dimensions

Heat technology

Safety distances

Chimney connection and combustion air information

Supplies

Other considerations

Saramo 2D 21

Dimensions

Heat technology

Safety distances

Chimney connection and combustion air information

Supplies

Other considerations

Saramo 2D 15

Dimensions

Heat technology

Safety distances

Chimney connection and combustion air information

Supplies

Other considerations

Saramo 2D 18