Lampo 18
The design of Lampo resembles the Salvo masonry heater. The vertical door emphasises its modern appearance. The rounded corners and the grouping of tiles varying in size provide a refined, ornamental look to the fireplace. The surface cladding can be implemented either by smooth soapstone overall or as a combination of smooth and ribbed soapstone surfaces. The ribbed surface is a water-cut, irregular, shiny Grafia surface. The different soapstone surfaces have been combined so that the front of the fireplace is covered from the top to the bottom with ornamental tiling running the width of the door. The wider Lampo model retains heat efficiently with its entire mass.
Efficiency
85 %

Maximum amount of wood
13 kg

Area to be heated
50-70 m2

Energy intensity
45.4 kWh
Lampo 21
The design of Lampo resembles the Salvo masonry heater. The vertical door emphasises its modern appearance. The rounded corners and the grouping of tiles varying in size provide a refined, ornamental look to the fireplace. The surface cladding can be implemented either by smooth soapstone overall or as a combination of smooth and ribbed soapstone surfaces. The ribbed surface is a water-cut, irregular, shiny Grafia surface. The different soapstone surfaces have been combined so that the front of the fireplace is covered from the top to the bottom with ornamental tiling running the width of the door. The wider Lampo model retains heat efficiently with its entire mass.
Efficiency
86 %

Maximum amount of wood
16 kg

Area to be heated
60-80 m2

Energy intensity
57.6 kWh
Lampo 21
The design of Lampo resembles the Salvo masonry heater. The vertical door emphasises its modern appearance. The rounded corners and the grouping of tiles varying in size provide a refined, ornamental look to the fireplace. The surface cladding can be implemented either by smooth soapstone overall or as a combination of smooth and ribbed soapstone surfaces. The ribbed surface is a water-cut, irregular, shiny Grafia surface. The different soapstone surfaces have been combined so that the front of the fireplace is covered from the top to the bottom with ornamental tiling running the width of the door. The wider Lampo model retains heat efficiently with its entire mass.
Efficiency
86 %

Maximum amount of wood
16 kg

Area to be heated
60-80 m2

Energy intensity
57.6 kWh
Lampo 21
The design of Lampo resembles the Salvo masonry heater. The vertical door emphasises its modern appearance. The rounded corners and the grouping of tiles varying in size provide a refined, ornamental look to the fireplace. The surface cladding can be implemented either by smooth soapstone overall or as a combination of smooth and ribbed soapstone surfaces. The ribbed surface is a water-cut, irregular, shiny Grafia surface. The different soapstone surfaces have been combined so that the front of the fireplace is covered from the top to the bottom with ornamental tiling running the width of the door. The wider Lampo model retains heat efficiently with its entire mass.
Efficiency
86 %

Maximum amount of wood
16 kg

Area to be heated
60-80 m2

Energy intensity
57.6 kWh
Lampo 21
The design of Lampo resembles the Salvo masonry heater. The vertical door emphasises its modern appearance. The rounded corners and the grouping of tiles varying in size provide a refined, ornamental look to the fireplace. The surface cladding can be implemented either by smooth soapstone overall or as a combination of smooth and ribbed soapstone surfaces. The ribbed surface is a water-cut, irregular, shiny Grafia surface. The different soapstone surfaces have been combined so that the front of the fireplace is covered from the top to the bottom with ornamental tiling running the width of the door. The wider Lampo model retains heat efficiently with its entire mass.
Efficiency
86 %

Maximum amount of wood
16 kg

Area to be heated
60-80 m2

Energy intensity
57.6 kWh
Lampo 15
The design of Lampo resembles the Salvo masonry heater. The vertical door emphasises its modern appearance. The rounded corners and the grouping of tiles varying in size provide a refined, ornamental look to the fireplace. The surface cladding can be implemented either by smooth soapstone overall or as a combination of smooth and ribbed soapstone surfaces. The ribbed surface is a water-cut, irregular, shiny Grafia surface. The different soapstone surfaces have been combined so that the front of the fireplace is covered from the top to the bottom with ornamental tiling running the width of the door. The wider Lampo model retains heat efficiently with its entire mass.
Efficiency
84 %

Maximum amount of wood
10 kg

Area to be heated
30-50 m2

Energy intensity
35.1 kWh
Lampo 21
The design of Lampo resembles the Salvo masonry heater. The vertical door emphasises its modern appearance. The rounded corners and the grouping of tiles varying in size provide a refined, ornamental look to the fireplace. The surface cladding can be implemented either by smooth soapstone overall or as a combination of smooth and ribbed soapstone surfaces. The ribbed surface is a water-cut, irregular, shiny Grafia surface. The different soapstone surfaces have been combined so that the front of the fireplace is covered from the top to the bottom with ornamental tiling running the width of the door. The wider Lampo model retains heat efficiently with its entire mass.
Efficiency
86 %

Maximum amount of wood
16 kg

Area to be heated
60-80 m2

Energy intensity
57.6 kWh
Lampo 15
The design of Lampo resembles the Salvo masonry heater. The vertical door emphasises its modern appearance. The rounded corners and the grouping of tiles varying in size provide a refined, ornamental look to the fireplace. The surface cladding can be implemented either by smooth soapstone overall or as a combination of smooth and ribbed soapstone surfaces. The ribbed surface is a water-cut, irregular, shiny Grafia surface. The different soapstone surfaces have been combined so that the front of the fireplace is covered from the top to the bottom with ornamental tiling running the width of the door. The wider Lampo model retains heat efficiently with its entire mass.
Efficiency
84 %

Maximum amount of wood
10 kg

Area to be heated
30-50 m2

Energy intensity
35.1 kWh
Lampo 21
The design of Lampo resembles the Salvo masonry heater. The vertical door emphasises its modern appearance. The rounded corners and the grouping of tiles varying in size provide a refined, ornamental look to the fireplace. The surface cladding can be implemented either by smooth soapstone overall or as a combination of smooth and ribbed soapstone surfaces. The ribbed surface is a water-cut, irregular, shiny Grafia surface. The different soapstone surfaces have been combined so that the front of the fireplace is covered from the top to the bottom with ornamental tiling running the width of the door. The wider Lampo model retains heat efficiently with its entire mass.
Efficiency
86 %

Maximum amount of wood
16 kg

Area to be heated
60-80 m2

Energy intensity
57.6 kWh
Lampo 15
The design of Lampo resembles the Salvo masonry heater. The vertical door emphasises its modern appearance. The rounded corners and the grouping of tiles varying in size provide a refined, ornamental look to the fireplace. The surface cladding can be implemented either by smooth soapstone overall or as a combination of smooth and ribbed soapstone surfaces. The ribbed surface is a water-cut, irregular, shiny Grafia surface. The different soapstone surfaces have been combined so that the front of the fireplace is covered from the top to the bottom with ornamental tiling running the width of the door. The wider Lampo model retains heat efficiently with its entire mass.
Efficiency
84 %

Maximum amount of wood
10 kg

Area to be heated
30-50 m2

Energy intensity
35.1 kWh
Lampo 21
The design of Lampo resembles the Salvo masonry heater. The vertical door emphasises its modern appearance. The rounded corners and the grouping of tiles varying in size provide a refined, ornamental look to the fireplace. The surface cladding can be implemented either by smooth soapstone overall or as a combination of smooth and ribbed soapstone surfaces. The ribbed surface is a water-cut, irregular, shiny Grafia surface. The different soapstone surfaces have been combined so that the front of the fireplace is covered from the top to the bottom with ornamental tiling running the width of the door. The wider Lampo model retains heat efficiently with its entire mass.
Efficiency
86 %

Maximum amount of wood
16 kg

Area to be heated
60-80 m2

Energy intensity
57.6 kWh
Lampo 15
The design of Lampo resembles the Salvo masonry heater. The vertical door emphasises its modern appearance. The rounded corners and the grouping of tiles varying in size provide a refined, ornamental look to the fireplace. The surface cladding can be implemented either by smooth soapstone overall or as a combination of smooth and ribbed soapstone surfaces. The ribbed surface is a water-cut, irregular, shiny Grafia surface. The different soapstone surfaces have been combined so that the front of the fireplace is covered from the top to the bottom with ornamental tiling running the width of the door. The wider Lampo model retains heat efficiently with its entire mass.
Efficiency
84 %

Maximum amount of wood
10 kg

Area to be heated
30-50 m2

Energy intensity
35.1 kWh
Lampo 21
The design of Lampo resembles the Salvo masonry heater. The vertical door emphasises its modern appearance. The rounded corners and the grouping of tiles varying in size provide a refined, ornamental look to the fireplace. The surface cladding can be implemented either by smooth soapstone overall or as a combination of smooth and ribbed soapstone surfaces. The ribbed surface is a water-cut, irregular, shiny Grafia surface. The different soapstone surfaces have been combined so that the front of the fireplace is covered from the top to the bottom with ornamental tiling running the width of the door. The wider Lampo model retains heat efficiently with its entire mass.
Efficiency
86 %

Maximum amount of wood
16 kg

Area to be heated
60-80 m2

Energy intensity
57.6 kWh
Lampo 18
The design of Lampo resembles the Salvo masonry heater. The vertical door emphasises its modern appearance. The rounded corners and the grouping of tiles varying in size provide a refined, ornamental look to the fireplace. The surface cladding can be implemented either by smooth soapstone overall or as a combination of smooth and ribbed soapstone surfaces. The ribbed surface is a water-cut, irregular, shiny Grafia surface. The different soapstone surfaces have been combined so that the front of the fireplace is covered from the top to the bottom with ornamental tiling running the width of the door. The wider Lampo model retains heat efficiently with its entire mass.
Efficiency
85 %

Maximum amount of wood
13 kg

Area to be heated
50-70 m2

Energy intensity
45.4 kWh
Lampo 18
The design of Lampo resembles the Salvo masonry heater. The vertical door emphasises its modern appearance. The rounded corners and the grouping of tiles varying in size provide a refined, ornamental look to the fireplace. The surface cladding can be implemented either by smooth soapstone overall or as a combination of smooth and ribbed soapstone surfaces. The ribbed surface is a water-cut, irregular, shiny Grafia surface. The different soapstone surfaces have been combined so that the front of the fireplace is covered from the top to the bottom with ornamental tiling running the width of the door. The wider Lampo model retains heat efficiently with its entire mass.
Efficiency
85 %

Maximum amount of wood
13 kg

Area to be heated
50-70 m2

Energy intensity
45.4 kWh
Lampo 18
The design of Lampo resembles the Salvo masonry heater. The vertical door emphasises its modern appearance. The rounded corners and the grouping of tiles varying in size provide a refined, ornamental look to the fireplace. The surface cladding can be implemented either by smooth soapstone overall or as a combination of smooth and ribbed soapstone surfaces. The ribbed surface is a water-cut, irregular, shiny Grafia surface. The different soapstone surfaces have been combined so that the front of the fireplace is covered from the top to the bottom with ornamental tiling running the width of the door. The wider Lampo model retains heat efficiently with its entire mass.
Efficiency
85 %

Maximum amount of wood
13 kg

Area to be heated
50-70 m2

Energy intensity
45.4 kWh
Lampo 18
The design of Lampo resembles the Salvo masonry heater. The vertical door emphasises its modern appearance. The rounded corners and the grouping of tiles varying in size provide a refined, ornamental look to the fireplace. The surface cladding can be implemented either by smooth soapstone overall or as a combination of smooth and ribbed soapstone surfaces. The ribbed surface is a water-cut, irregular, shiny Grafia surface. The different soapstone surfaces have been combined so that the front of the fireplace is covered from the top to the bottom with ornamental tiling running the width of the door. The wider Lampo model retains heat efficiently with its entire mass.
Efficiency
85 %

Maximum amount of wood
13 kg

Area to be heated
50-70 m2

Energy intensity
45.4 kWh
Lampo 18
The design of Lampo resembles the Salvo masonry heater. The vertical door emphasises its modern appearance. The rounded corners and the grouping of tiles varying in size provide a refined, ornamental look to the fireplace. The surface cladding can be implemented either by smooth soapstone overall or as a combination of smooth and ribbed soapstone surfaces. The ribbed surface is a water-cut, irregular, shiny Grafia surface. The different soapstone surfaces have been combined so that the front of the fireplace is covered from the top to the bottom with ornamental tiling running the width of the door. The wider Lampo model retains heat efficiently with its entire mass.
Efficiency
85 %

Maximum amount of wood
13 kg

Area to be heated
50-70 m2

Energy intensity
45.4 kWh
Lampo 18
The design of Lampo resembles the Salvo masonry heater. The vertical door emphasises its modern appearance. The rounded corners and the grouping of tiles varying in size provide a refined, ornamental look to the fireplace. The surface cladding can be implemented either by smooth soapstone overall or as a combination of smooth and ribbed soapstone surfaces. The ribbed surface is a water-cut, irregular, shiny Grafia surface. The different soapstone surfaces have been combined so that the front of the fireplace is covered from the top to the bottom with ornamental tiling running the width of the door. The wider Lampo model retains heat efficiently with its entire mass.
Efficiency
85 %

Maximum amount of wood
13 kg

Area to be heated
50-70 m2

Energy intensity
45.4 kWh
Lampo 18
The design of Lampo resembles the Salvo masonry heater. The vertical door emphasises its modern appearance. The rounded corners and the grouping of tiles varying in size provide a refined, ornamental look to the fireplace. The surface cladding can be implemented either by smooth soapstone overall or as a combination of smooth and ribbed soapstone surfaces. The ribbed surface is a water-cut, irregular, shiny Grafia surface. The different soapstone surfaces have been combined so that the front of the fireplace is covered from the top to the bottom with ornamental tiling running the width of the door. The wider Lampo model retains heat efficiently with its entire mass.
Efficiency
85 %

Maximum amount of wood
13 kg

Area to be heated
50-70 m2

Energy intensity
45.4 kWh
Check out also

Akko 2D
Height | 1935 - 2235 mm |
Width | 1100 mm |
Depth | 550 mm |
Weight | 1860 - 2300 kg |
Area to be heated | 55 - 80 m2 |

Akko
Height | 1635 - 2235 mm |
Width | 1100 mm |
Depth | 550 mm |
Weight | 1660 - 2320 kg |
Area to be heated | 50 - 90 m2 |

Otra
Height | 1635 - 2235 mm |
Width | 950 mm |
Depth | 550 mm |
Weight | 1500 - 2090 kg |
Area to be heated | 30 - 80 m2 |

Laivo S
Height | 1890 - 2190 mm |
Width | 840 mm |
Depth | 550 mm |
Weight | 1440 - 1690 kg |
Area to be heated | 40 - 70 m2 |

Kelva S
Height | 1890 - 2190 mm |
Width | 690 mm |
Depth | 550 mm |
Weight | 1210 - 1430 kg |
Area to be heated | 30 - 60 m2 |

Salvo S 2D
Height | 1845 - 2145 mm |
Width | 780 mm |
Depth | 550 mm |
Weight | 1270 - 1460 kg |
Area to be heated | 40 - 80 m2 |

Salvo S
Height | 1845 - 2145 mm |
Width | 780 mm |
Depth | 550 mm |
Weight | 1320 - 1570 kg |
Area to be heated | 40 - 70 m2 |

Salvo 2D
Height | 1845 - 2145 mm |
Width | 1100 mm |
Depth | 550 mm |
Weight | 1700 - 2140 kg |
Area to be heated | 55 - 80 m2 |

Salvo
Height | 1545 - 2145 mm |
Width | 1100 mm |
Depth | 550 mm |
Weight | 1500 - 2160 kg |
Area to be heated | 50 - 90 m2 |

Lampo S
Height | 1845 - 2145 mm |
Width | 630 mm |
Depth | 550 mm |
Weight | 1100 - 1300 kg |
Area to be heated | 30 - 60 m2 |